Faucet: The most important computer flat knitting machine accessories, the whole machine head parts are installed on it, its parts are front and back pusher, pusher coke ball and screw, pusher slider, slider is equipped with bearings. The front part of the faucet is equipped with a three-eye cover plate. The three-eye screw is a needle-starting triangular pull rod. The screw in the center eye is called a live chicken-heart pull rod screw. The well ring of the pull rod and the needle-starting triangular small wrench, the small wrench of the live chicken-heart, and the scaled surface of the machine head are called scaling plate. The scaling plate is equipped with a small green pressure plate, and the screw in the center of the scaling plate is called two- The lower end of the two ends of the screw is tied to the big triangle. The center of the two ends of the screw is equipped with a pointer, and the top of the pointer is equipped with a Yuanbao screw. The swing shuttle rack is installed behind the tap. The swing rod and shuttle rod are installed on the swing shuttle rack. The bolt switch is also installed at the back of the machine head. The main parts on the machine head are the flower board.