& Nbsp; Flying computerized flat knitting machine is a weft knitting machine with double needle plates and tongue needles. Its triangular installation is like a set of plane cams. The needle pin of the knitting needle can enter the groove of the cam, move the triangle, force the knitting needle to make regular fluctuation activities in the needle groove of the needle board, and through the action of the needle hook and the needle tongue, the yarn can be knitted into knitted fabric. In the process of needle rising, the coil gradually withdraws from the hook, opens the needle tongue and hangs the needle tongue on the needle pole; in the process of needle descending, the needle hooks the yarn laid by the new cushion and bends it into a loop by pulling and bending, while in the process of restoring the existing coil, the needle hook is removed. The new coil passes through the old coil and is connected in series with the old coil. Many coils made of knitting constitute the needle. Textile.
& nbsp; < br />
Operational control elements are 8-inch and 10-inch VGA true-color display; keystrokes or touch input,
.
Program operation uses 32-bit ARM chip as the core, and FPGA as the control system of the whole machine. It is easy to upgrade online, has strong anti-interference, effective dust and moisture proof, and is not easy to burn down. It has strong adaptability to high temperature and bad working environment with multi-cotton floss;

Suitable for single-head single-system, double-system and three-system models;

Needle selection speed 12KHZ/sec;

1:1 Acquisition of encoder signal, accurate needle selection without cumulative tolerance;

Zero position can be quickly obtained during initial debugging;

Common U-disk can realize fast access pattern and upgrade system software;

Network management can download and update patterns quickly, monitor the working status of the machine, and upgrade the latest software online.