Knitting flat knitting machine is the main production equipment for woolen sweaters. The machine is composed of more than 130 computer flat knitting machine accessories. The specification of flat knitting machine is based on its needle type and length, that is, the needle type pointer board has several grooves per inch (2.54 cm); the length is the total transverse distance (inch) with the needle groove on the needle board, that is, the effective length of the needle board. Flat knitting machine specifications are: 3x 3 6, 3.5x6, 4X36, 5x36, 6x36, 7x36, 9X36, 11x36, 12X36 and 14x36, the above figures, the first number of pointer type, the last number of finger length, but the special specifications of flat knitting machine only change the name on the length, such as 24 inches, 32 inches, 40 inches, 42 inches and so on. & nbsp; & nbsp; < br />
Detailed requirements for computer flat knitting machine accessories:

1. Frame: There are two hilltops, and the hilltops are connected into a whole by two beams. It is a casting. The small pieces installed on the frame are wrenches, wrench fixing screw, pin plate screw and pin plate screw compression spring. & nbsp; & nbsp; & nbsp;
2. Needle plate: It is made of steel plate with considerable hardness. The parts on it include pressure bar, small pressure bar, machine needle, tofu block and fixed screw. & nbsp; & nbsp; & nbsp;
3. Guide rail: The guide rail is made of prayer or special steel. It is fastened to the frame with fixed screw. The computer flat knitting machine fittings are generally divided into front and back two. It is the track for the head to walk. There is also a yarn nozzle guide rail above the rear guide rail. It is mainly used for the smooth movement of the random head of the yarn feeding nozzle or for the replacement of the yarn nozzle. & nbsp; & nbsp; & nbsp;
4. Faucet: It is the heart of the flat knitting machine. The computer flat knitting machine fittings of the whole machine head are installed on it. Its parts include front and back pushers, pusher charcoal balls and screw, pusher pressure plate (also known as pusher slider) and bearing on the slider. The front part of the faucet is equipped with a three-eye cover plate. The three-eye screw is a needle-starting triangular pull rod. The screw in the center eye is called a live chicken-heart pull rod screw. The well ring of the pull rod and the needle-starting triangular small wrench, the small wrench of the live chicken-heart, and the scaled surface of the machine head are called scaling plate. The scaling plate is equipped with a small green pressure plate, and the screw in the center of the scaling plate is called two- The lower end of the two ends of the screw is tied to the big triangle. The center of the two ends of the screw is equipped with a pointer, and the top of the pointer is equipped with a Yuanbao screw. The swing shuttle rack is installed behind the tap. The swing rod and shuttle rod are installed on the swing shuttle rack. The bolt switch is also installed at the back of the machine head. The main parts on the machine head are the flower board. & nbsp; & nbsp;
& nbsp; 5. Flower board: Floor board is the center of flat knitting machine, it has a base, all triangles are installed on the base, the triangles of the ceiling have needle triangle, chicken heart triangle (live chicken heart, chicken heart), herringbone triangle, big triangle.